LED Panel v2.4 (c) 1992-94 by Christoph Zwerschke ================================================= Shortened version of the instructions in English. Idea and Purpose of LED Panel ----------------------------- The basic idea of "LED Panel" is to make any access to BIOS drives (floppy, harddisk, RAM disk etc.) visible and that distinctively between drives and kind of access (reading or writing). As extra options the program moreover can show the state of the CapsLock key as well as the actual date and time. All informations are shown in the upper right corner of the screen (normally you can only see the blank right end of the menu title line there). Restrictions ------------ The LED Panel will not work with most sorts of graphic cards and "true color". That's because LED Panel is a "TSR" program and therefore cannot use VDI graphics but writes directly to the screen instead. Maybe this will be fixed somehow in the future. The LED Panel Program --------------------- The actual program which keeps itself resident in memory and shows drive access on the screen is called "LEDPANEL.PRG". You can start it from the desktop or put it into the AUTO folder, if you want it to start automatically. LEDPANEL.PRG should run as one of the last programs in the AUTO folder then. The Configuration Program ------------------------- The configuration of the running program and also the program file can be set up by the program CONFIG.PRG. Sorry, there is no English version yet. You can load the configuration directly from the program file with the menu option "Setup laden" and later write the configuration with "Setup speichern". Don't pack or rename the program file LEDPANEL.PRG. When you choose the menu option "Setup „ndern" you can change the configuration in a dialog box called "LED-Panel Konfiguration". If you have the LED Panel installed in memory, you can watch the effects simultaneously on the screen. Here is a short explanation of the buttons in the dialog box: "Angemeldete Laufwerke" Use all effective BIOS drives or choose a selection (under that). "aktiv" LED Panel display active or inactive. "Dauer" Choose LED luminous time delay. "Abstand" Distance of the LED Panel display to the right screen border. "Caps" Show state of CapsLock key. "R/W" Show "R" (read) and "W" (write) symbols. "LEDs" Show LEDs for all selected drives (A: is leftmost LED). "Date" Show date. Over that you can choose the digit font and whether to show years ("Jahr") or not. "Time" Show time. Over that you can choose the digit font and whether to show seconds ("Sek") or not. "Hole" This button appears if you have selected "Time", but haven't selected "Date". In this case you can choose with this button, whether to display date instead of time when the Alternate key is pressed or not. "Clock symbol" With this button and some other noncaptioned buttons you can make small spaces to enhance lucidity. "Lcken" Show space instead of LED if a drive is not used or not selected. "B aus" Sum up access to both floppy drives to one LED. "runde LEDs" Choose LED shape, either cornered or round. "Zusatzlcke" Show extra spaces between LEDs. "immer" means spacing for every LED. You can also choose extra space for two particular drives. "LED-Zeilen" Choose either one ("eine") or two ("zwei") lines of LEDs. If you choose two, the upper line stands for read access and the lower line for write access. If you select "auto" the number of lines will be automatically fit to the height of the menu title line due to the current screen resolution. "Panel schwarz" Choose background color as either black or white. "farbige LEDs" Select whether color shall be used to distinguish between read access (green) and write access (red). You can leave the dialog box with the button "Abbruch" or with the "OK" button. If you choose "OK", changes will be preserved, other- wise changes will be rejected. LED-Panel "light" ----------------- LEDLIGHT.PRG is a "light" version of LEDPANEL.PRG. It can only do the basic funktions of the LED Panel. If you want to install more than one LED Panel at a time (maybe one before and one after a harddisk cache program) you have to change the identification of one of the programs from "LEDP" to something else (but you will have to use a disk monitor program for that). You can also make a copy of CONFIG.PRG with the different identification. Normally only one LED Panel at a time is allowed. Liability Disclaimer -------------------- As always: The author disclaims any liability for any harm due to the use of the LED panel. Copyright --------- Copyright (c) 1992-94 by Christoph Zwerschke. All rights reserved. Now for something gratifying: "LED panel" is a "Public Domain" program. It may be copied and given away as long as it stays in a non commercial scale. If you like the program, you can write to me and send a small donation. The Author's Address -------------------- The programmer on duty: Christoph Zwerschke Banking account: Am Steinfeld 4 Bezirkssparkasse Heidelberg 59379 Selm-Cappenberg BLZ 67250020 Germany Account no. 4338405